10
4450A EN 20060221Introducing the CR 85-X
CR 85-X DIGITIZER
Markings and labels
Always take into account the markings and labels provided on the inside and
outside of the machine. A brief overview of these markings and labels and
their meaning is given below.
Safety warning, indicating that the CR 85-X manuals should be consulted
before making any connections to other equipment. The use of accessory
equipment not complying with the equivalent safety requirements of this
Digitizer may lead to a reduced level of safety of the resulting system.
Consideration relating to the choice of accessory equipment shall include:
• Use of the accessory equipment in the patient vicinity,
• Evidence that the safety certification of the accessory equipment has been
performed in accordance with the appropriate IEC 601-1 and IEC 601-1-1
harmonized national standard.
In addition all configurations must comply with the medical electrical
systems standard IEC 601-1-1. The party that makes the connections acts as
system configurator and is responsible for complying with the systems
standard.
If required contact your local service organization.
In order to reduce the risk of electric shock, do not remove any covers.
Caution hot:
Keep hands clear from the erasure unit.
Type B equipment:
Indicates that the CR 85-X complies with the limits for type B equipment.
To Next Page
Loading...
