EasyManua.ls Logo

AGFA CR MD1.0 GENERAL SET - Specifications

AGFA CR MD1.0 GENERAL SET
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Available Sizes
(CR MD1.0 Gener-
al)
35 cm x 43 cm
35 cm x 35 cm
24 cm x 30 cm
18 cm x 24 cm
15 cm x 30 cm
Available Sizes
(CR HD5.0S Gener-
al)
35 cm x 43 cm
24 cm x 30 cm
18 cm x 24 cm
Available Sizes
(CR MD1.0F Gener-
al)
35 cm x 43 cm
Available Sizes
(CR DD1.0 Vet)
35 cm x 43 cm
15 cm x 30 cm
Compliance
Outer cassette dimensions are compliant with ISO
4090 - 2001
Identification Barcode embedded in the image plate.
Environmental
storage and trans-
port conditions
Allowed temperature and humidity levels in packed
condition:
Temperature: allowed -25 to 55°C (-13°F to 131°F)
Relative humidity: allowed: 15-80%
Environmental op-
eration conditions
Allowed temperature and humidity levels for opera-
tion:
Temperature: recommended 20-25°C (68-77°F) / al-
lowed: 15-35°C (59-95°F)
Relative humidity: recommended 30-60% / allowed:
10-75%
Characteristics
The Agfa phosphor has excellent dark decay character-
istics. Two hours after exposure, approximately 80% of
the energy stored upon exposure is still available. The
image retention is better than 50% up to 24 hours after
irradiation.
AGFA CR Plates and Cassettes | Using the Agfa CR Plates and Cassettes | 53
2492F EN 20180417 1049

Related product manuals