17
after image has been enlarged in zoom mode. In the ZOOM / PAN menu,
press the DOWN button to enter the PAN function and menu button to
confirm the setting. Now press UP/ DOWN/ LEFT/ RIGHT button to move
the display range of the picture. To cancel the PAN function, press the
menu and then DOWN button to exit.
3.5 Using your DC-302
3.5.1 Take pictures
You just press the shutter button down and with a distinct beeping sound, a
snapshot is finished. At the same time, the number on the monitor screen
will decrease by one.
3.5.2 Self-timer
Press the menu button into the menu, change to the self-timer mode, after
that press the menu button to confirm. Press the shutter button, the
self-timer LED will blink for 10 seconds and then capture a picture.
To Next Page
Loading...
