AGFEO T 18 - The T 18 as a Tabletop Unit; The T 18 as a Wall Unit

24
AGFEO T 18
The T 18 as a tabletop unit
To use your AGFEO T 18 as a tabletop unit,
fit the unit stand as shown on the adjoining
diagram. Three different mounting posi-
tions are available enabling you to set the
phone at different tilt angles. Ensure that
the unit stand audibly clicks into place.
The T 18 as a wall unit
For wall mounting, fit the unit
stand to the wall using two screws
as shown (Fig. 1). Then fit the
phone to the unit stand (Fig. 2).
Take out the plastic component in
the receiver cradle, turn it through
180 degrees and reinsert (Fig. 3).