21
Appendix
Electrical Connections
• The CAN bus is a serial bus with high speed data transfer. The two
connectors for the CAN bus are used for internal module data transfer and
synchronization.
• The power input socket accepts a line voltage of 100 – 240 VAC ±10 % with a
line frequency of 50 or 60 Hz. Maximum power consumption varies by
module. There is no voltage selector on your module because the power
supply has wide-ranging capability. There are no externally accessible fuses,
because automatic electronic fuses are implemented in the power supply.
Serial Number Information 1200 Series and 1290 Infinity
The serial number information on the instrument labels provide the following
information:
Never use cables other than the ones supplied by Agilent
Technologies to ensure proper functionality and compliance with
safety or EMC regulations.
Format CCIIISSSSS
CC CC country of manufacturing
• DE = Germany
• JP = Japan
• CN = China
III identifier: normally only changed at significant
modifications
SSSSS real serial number
To Next Page
Loading...
