Agilent Technologies 1200 Infinity Series Manual

3
Features
Feature summary:
• Analog input for data collection from any type of 3rd-party detector such as
evaporative light scattering, laser-induced fluorescence, refractive index or
radioactivity detectors
• Analog-to-digital conversion of analog input for full data analysis through
Agilent chromatography data system, or for peak-based fraction collection
triggered by baseline threshold or peak slope (peak width > 0.2 seconds)
• Analog output to feed pump pressure traces or detector signals from Agilent
LC modules to third-party data systems
• General purpose input/output interface (GPIO/ERI) for digital mass-based
fraction triggering and general purpose use
• Low voltage output of 5 V and/or 24 V
• Four timetable programmable relay contacts for control of external devices
through close/open commands
• External leak sensor with separate input line for improved lab safety
• CAN connection to 1200 Series LC or 1200 Infinity Series LC modules

Agilent Technologies 1200 Infinity Series Specifications

General

Brand	Agilent Technologies
Model	1200 Infinity Series
Category	Security Sensors
Language	English