Installation 1
3200P pH Meter User Guide 9
Installing the Power Adaptor
The universal power adapter that is included with the meter
is the only power adapter recommended for use with this
unit.
The external electrical power adapter is rated at 100 to
240 VAC, 1 A, 50/60 Hz.
This power adaptor provides a plug converter which
supports several kinds of plugs. Choose the appropriate
power plug. Connect the output plug of the power adapter to
the power input on the meter. A click will be heard when
the plug is properly engaged.
Figure 3 Installing the Power Adaptor
To Next Page
Loading...
Need help?
General
