Need help?Do you have a question about the Agilent Technologies N6705 and is the answer not in the manual?
General| Brand | Agilent Technologies |
|---|---|
| Model | N6705 |
| Category | Measuring Instruments |
| Language | English |
Ensures instrument chassis and cover are connected to an electrical ground for shock hazard prevention.
Explains safety symbols and provides definitions for CAUTION and WARNING notices.
Provides an overview of the instrument's front panel controls and their functions.
Details the connectors and ports located on the rear panel of the instrument.
Describes the display for output voltage and current measurements.
Explains how to view and analyze voltage and current waveforms over time.
Covers safety considerations, environment, cleaning, and module location.
Details how to connect the AC power cord, including safety warnings.
Provides guidelines for selecting appropriate wire sizes and lengths for load connections.
Explains how to use remote sensing for improved voltage regulation at the load.
Describes how to connect to the instrument's GPIB, LAN, and USB interfaces.
Explains how to power on the instrument and the initial display.
Covers basic operation of the power supply functions.
Details how to select and set output voltage and current.
Explains how to configure and use the built-in arbitrary waveform generator.
Describes how to use the instrument's integrated voltmeter and ammeter.
Explains how to use the scope function to display output signals as a function of time.
Details how to log voltage and current data for extended periods.
Covers saving, loading, exporting, and managing files on the instrument.
Explains how to set user preferences like screen saver and front panel controls.
Details administrative functions including security and system settings.
Discusses constant voltage, constant current, and multi-quadrant operation modes.
Explains voltage and current priority modes for N678xA SMU.
Covers digitizing, seamless measurements, sample rate, and window functions.
Lists supplemental characteristics for the N6705A/B mainframe.
Provides a comprehensive list of SCPI commands for instrument control.
Details the default instrument settings upon power-on.
Explains how to configure the digital port's pin functions and polarity.
Describes configuring digital pins for general-purpose I/O.
Details configuring pins 1 and 2 as a fault-output pair.
Explains how to configure pin 3 as a remote inhibit input.
To Next Page