To Next PageTo Next Page
Need help?Do you have a question about the Agilent Technologies EXA N9010A and is the answer not in the manual?
General| Frequency Resolution | 1 Hz |
|---|---|
| Third Order Intercept (TOI) | +15 dBm (typical) |
| Resolution Bandwidth (RBW) | 1 Hz to 10 MHz |
| Video Bandwidth (VBW) | 1 Hz to 10 MHz |
| Sweep Time | 1 ms to 1000 s |
| Input Connector | N-type female |
| Power Requirements | 100 to 240 VAC, 50/60 Hz |
| Amplitude Range | +30 dBm to DANL |
| Input VSWR | < 1.5:1 (typical) |
| Input Impedance | 50 Ω |
| Display | 8.4-inch TFT LCD |
| Interface | LAN, USB, GPIB |
| Operating Temperature Range | 0 °C to 50 °C |
| Storage Temperature Range | -40 °C to +70 °C |
| Amplitude Accuracy | ±0.5 dB |
| Dynamic Range | > 100 dB (typical) |
Explains the purpose and capabilities of the SCPI Language Compatibility application.
Specifies the necessary hardware and firmware versions for the application.
Provides step-by-step instructions for installing the SCPI compatibility application.
Explains how to select and activate the SCPI Language Compatibility mode.
Allows adjustment of mode configuration settings for the current mode.
Guides on selecting the emulation model (e.g., R&S FSE, FSP, FSU).
Controls delta-marker functions, with limitations noted for specific measurements.
Details the structure and rules for forming SCPI commands.
