Agilent Technologies EXA N9010A - Hardware and Firmware Requirements For N9062 A;W9062 A

21
Getting Started
Hardware and Firmware Requirements for N9062A/W9062A
Hardware and Firmware Requirements for
N9062A/W9062A
One of the following Agilent signal analyzers is required to run the N9062A/W9062A application.
Table 1-1 Compatible Agilent PXA Series Signal Analyzers
Analyzer Model
Number
Upper Frequency Limit Firmware
N9030A-503 3.6 GHz Rev A.06.00 or later
N9030A-508 8.4 GHz Rev A.06.00 or later
N9030A-513 13.6 GHz Rev A.06.00 or later
N9030A-526 26.5 GHz Rev A.06.00 or later
N9030A-543 43 GHz Rev A.08.00 or later
N9030A-544 44 GHz Rev A.08.00 or later
N9030A-550 50 GHz Rev A.08.00 or later
Table 1-2 Compatible Agilent MXA Series Signal Analyzers
Analyzer Model
Number
Upper Frequency Limit Firmware
N9020A-503 3.6 GHz Rev A.06.00 or later
N9020A-508 8.4 GHz Rev A.06.00 or later
N9020A-513 13.6 GHz Rev A.06.00 or later
N9020A-526 26.5 GHz Rev A.06.00 or later
Table 1-3 Compatible Agilent EXA Series Signal Analyzers
Analyzer Model
Number
Upper Frequency Limit Firmware
N9010A-503 3.6 GHz Rev A.06.00 or later
N9010A-507 7 GHz Rev A.06.00 or later
N9010A-513 13.6 GHz Rev A.06.00 or later
N9010A-526 26.5 GHz Rev A.06.00 or later
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html