11 4
Compatible SCPI Commands
Supported SCPI Commands
The query returns the current state of this setting.
HCOPy Subsystem
The HCOPy subsystem controls the rendering of display information on output devices or to files.
Most of the HCOPy subsystem SCPI commands are accepted, but take no action and report no error.
There are two exceptions: HCOPy:ABORt and HCOPy[:IMMediate].
HCOPy:ABORt
Aborts hardcopy output.
HCOPy:CMAP<1 to 26>:DEFault1|2|3
This command is accepted, but takes no action and reports no error.
HCOPy:CMAP<1 to 26>:HSL <hue>,<sat>,<lum>
This command is accepted, but takes no action and reports no error.
Remote Command :FORMat[:DATA] ASCii|INTeger,32|REAL,32|REAL|64
:FORMat[:DATA]?
Example FORM REAL,32
FORM ASC
Remote Command Notes FSE, FSP, FSU
Preset ASCii
Remote Command :HCOPy:ABORt
Example HCOP:ABOR
Remote Command Notes FSE, FSP, FSU
Remote Command :HCOPy:CMAP[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|
18|19|20|21|22|23|24|25|26:DEFault[1]|2|3
Example HCOP:CMAP:DEF
Remote Command Notes FSP, FSU
Remote Command :HCOPy:CMAP[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|
18|19|20|21|22|23|24|25|26:HSL <real>,<real>,<real>
:HCOPy:CMAP[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|
18|19|20|21|22|23|24|25|26:HSL?
Example HCOP:CMAP:HSL 0.3,0.8,1.0
HCOP:CMAP:HSL?
To Next Page
Loading...
Need help?
General
