107
Compatible SCPI Commands
Supported SCPI Commands
DISPlay:PSAVe[:STATe] ON | OFF
Switches the display power-save mode on or off.
This command is accepted, but takes no action and reports no error.
DISPlay:PSAVe:HOLDoff 1 to 60
Specifies the holdoff time for the displayâs power-save mode.
This command is accepted, but takes no action and reports no error.
DISPlay:CMAP<1 to 26>:DEFault<1|2>
Resets the displayâs screen colors to their defaults.
This command is accepted, but takes no action and reports no error.
DISPlay:CMAP<1 to 26>:HSL <hue>,<sat>,<lum>
Defines the instrumentâs color map.
Remote Command :DISPlay:PSAVe[:STATe] ON|OFF|1|0
:DISPlay:PSAVe[:STATe]?
Example DISP:PSAV OFF
DISP:PSAV?
Remote Command Notes FSE, FSP, FSU
Preset OFF
State Saved Saved in instrument state.
Remote Command :DISPlay:PSAVe:HOLDoff <int>
:DISPlay:PSAVe:HOLDoff?
Example DISP:PSAV:HOLD 30
DISP:PSAV:HOLD?
Remote Command Notes FSE, FSP, FSU
Preset 15
Min 1
Max 60
Remote Command :DISPlay:CMAP[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|1
7|18|19|20|21|22|23|24|25|26:DEFault[1]|2
Example DISP:CMAP:DEF
Remote Command Notes FSE, FSP, FSU
To Next Page
Loading...
Need help?
General
