89
Compatible SCPI Commands
Supported SCPI Commands
CALCulate<1|2>:MARKer<1...4>:COUNt:FREQuency?
Queries the frequency counter result for the specified marker.
CALCulate<1|2>:MARKer<1...4>:LOEXclude ON | OFF
The command switches local oscillator suppression for peak search on or off.
This setting is valid for all markers and delta markers.
The query returns the current state of this setting.
CALCulate<1|2>:MARKer<1...4>:Y?
Queries the measured value of the specified marker.
If required, the marker is activated, or switched to marker mode.
CALCulate<1|2>:MARKer<1...4>:Y:PERCent
This command positions the selected marker in the selected window to the given probability. If marker 2,
3 or 4 is selected and used as a delta marker, it is switched to marker mode.
Remote Command Notes FSE, FSP, FSU
Preset 1KHZ
Min 1
Max 10KHz
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:COUNt:FREQuency?
Example CALC:MARK:COUN:FREQ?
Remote Command Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:LOEXclude ON|OFF|1|0
:CALCulate[1]:MARKer[1]|2|3|4:LOEXclude?
Example CALC:MARK:LOEX ON
Remote Command Notes FSE, FSP, FSU
Preset ON
State Saved Saved in instrument state.
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:Y?
Example CALC:MARK2:Y 1
Remote Command Notes FSE, FSP, FSU
To Next Page
Loading...
Need help?
General
