Agilent Technologies EXA N9010A - Mmemory:rdirectory <Directory_Name; Mmemory:store<1|2>:State 1,<File_Name; Mmemory:store<1|2>:Trace <1; Mmemory:clear:state 1,<File_Name

126
Compatible SCPI Commands
Supported SCPI Commands
The query returns the current value of this setting.
MMEMory:RDIRectory <directory_name>
Deletes the directory specified by <directory_name>.
MMEMory:STORe<1|2>:STATe 1,<file_name>
Stores the current analyzer state settings in a set of files. The files use the specified file name, but have
differing extensions..
MMEMory:STORe<1|2>:TRACe <1…6>,<file_name>
Stores the specified trace (1…6) in an ASCII-format file specified by <file_name>.
MMEMory:CLEar:STATe 1,<file_name>
Clears the analyzer setting specified by <file_name>.
This command is accepted, but takes no action and reports no error.
Remote Command :MMEMory:NAME <string >
:MMEMory:NAME?
Example :MMEM:NAME ‘1.PNG’
:MMEM:NAME?
Remote Command Notes FSE, FSP, FSU
Remote Command :MMEMory:RDIRectory <string>
Example :MMEM:RDIR ‘C:\Test’
Remote Command Notes FSE, FSP, FSU
Remote Command :MMEMory:STORe:STATe 1,<string>
Example :MMEM:STORe:STAT 1,’myState.state’
Remote Command Notes FSE, FSP, FSU
Remote Command :MMEMory:STORe:TRACe
TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6|ALL,<string>
Example :MMEM:STORe:TRACe TRACe1,’Trace1.trace’
Remote Command Notes FSE, FSP, FSU
Remote Command :MMEMory:CLEar:STATe 1,<string>
Example :MMEM:CLE:STAT 1,’Trace1.trace’
Remote Command Notes FSE, FSP, FSU
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html