Agilent Technologies EXA N9010A - [Sense<1|2>:]Power:achannel:bandwidth|Bwidth:achannel 100 Hz-1000 Mhz; [Sense<1|2>:]Power:achannel:bandwidth|Bwidth:alternate<1|2> 100 Hz to 1000 Mhz; [Sense<1|2>:]Power:achannel:mode Absolute | Relative

144
Compatible SCPI Commands
Supported SCPI Commands
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth:ACHannel 100Hz–1000MHz
Specifies the radio transmission system’s adjacent channel bandwidth. If the adjacent channel bandwidth
is changed, all alternate adjacent channel’s bandwidths are automatically set to the same value.
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth:ALTernate<1|2> 100 Hz to 1000 MHz
Specifies the radio transmission system’s channel bandwidth for the first and second alternate adjacent
channel. If alternate adjacent channel 1’s bandwidth is changed, then alternate adjacent channel 2’s
bandwidth is automatically set to the same value.
[SENSe<1|2>:]POWer:ACHannel:MODE ABSolute | RELative
Switches between absolute and relative adjacent channel measurements.
Remote Command [:SENSe]:POWer:ACHannel:BANDwidth|BWIDth:ACHannel
<freq>
[:SENSe]:POWer:ACHannel:BANDwidth|BWIDth:ACHannel?
Example POW:ACH:BWID:ACH 30kHz
Remote Command Notes FSE, FSP, FSU
Preset 14KHz
State Saved Saved in instrument state.
Min 100Hz
Max 1000MHz
Remote Command [:SENSe]:POWer:ACHannel:BANDwidth|BWIDth:ALTernate[1]|2
<freq>
[:SENSe]:POWer:ACHannel:BANDwidth|BWIDth:ALTernate[1]|2
?
Example POW:ACH:BWID:ALT2 30kHz
Remote Command Notes FSP, FSU
Preset 14KHz
State Saved Saved in instrument state.
Min 100Hz
Max 1000MHz
Remote Command [:SENSe]:POWer:ACHannel:MODE ABSolute|RELative
[:SENSe]:POWer:ACHannel:MODE?
Example POW:ACH:MODE REL
Remote Command Notes FSE, FSP, FSU
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html