80
Compatible SCPI Commands
Supported SCPI Commands
The query returns the current value set.
This mode does not support any unit for this command.
CALCulate<1|2>:LIMit<1...6>:LOWer:STATe ON | OFF
The command activates or deactivates the specified lower limit line. Limit check is activated separately,
using CALC:LIM:STAT ON.
The query returns the current state of this setting.
CALCulate<1|2>:LIMit<1...6>:LOWer:OFFSet <numeric_value>
The command defines an offset for the Y axis of the specified relative lower limit line.
This mode does not support any unit for this command.
The query returns the current value of this setting.
Remote Command CALCulate[1]:LIMit[1]|2|3|4|5|6:LOWer[:DATA]
<real>,<real>âĻ
CALCulate[1]:LIMit[1]|2|3|4|5|6:LOWer[:DATA]?
Example CALC:LIM:LOW:DATA 1,20,100,300,1
CALC:LIM:LOW:DATA?
Remote Command Notes FSE, FSP, FSU
State Saved Saved in instrument state.
Remote Command :CALCulate[1]:LIMit[1]|2|3|4|5|6:LOWer:STATe ON|OFF|1|0
:CALCulate[1]:LIMit[1]|2|3|4|5|6:LOWer:STATe?
Example CALC:LIM:LOW:STAT OFF
CALC:LIM:LOW:STAT?
Remote Command Notes FSE, FSP, FSU
Preset OFF
State Saved Saved in instrument state.
Remote Command :CALCulate[1]:LIMit[1]|2|3|4|5|6:LOWer:OFFSet <real>
:CALCulate[1]:LIMit[1]|2|3|4|5|6:LOWer:OFFSet?
Example CALC:LIM:LOW:OFFS 1
CALC:LIM:LOW:OFFS?
Remote Command Notes FSE, FSP, FSU
Preset 0
To Next Page
Loading...
Need help?
General
