Agilent Technologies EXA N9010A User Manual

121
Compatible SCPI Commands
Supported SCPI Commands
INPut<1|2>:GAIN:STATe
The command switches the instrument’s preamplifier on or off.
The query returns the current state of this setting.
INSTrument Subsystem
The INSTrument subsystem allows you to select the analyzer’s operating mode.
INSTrument[:SELect] SANalyzer | DDEMod | ADEMod | MGSM | WCDPower|BWCDpower
|MWCDpower | BC2K| BDO
The command selects the analyzer’s mode according to the value of a text parameter.
This mode supports a parameter set that differs from that listed above. For details, see the table of
available parameter values in the section “INSTrument:NSELect <numeric value>” on page 121.
The query returns the current state of this setting.
INSTrument:NSELect <numeric value>
The command selects the analyzer’s mode according to the value of a numeric parameter.
This mode supports the parameter values listed in the table below.
Mode Identification Numbers and Strings for X-Series Analyzers:
Remote Command :INPut[1]:GAIN:STATe ON|OFF|1|0
:INPut[1]:GAIN:STATe?
Example INP:GAIN:STAT ON
Remote Command Notes FSP, FSU
Preset OFF
State Saved Saved in instrument state.
Remote Command :INSTrument[:SELect] <string>
:INSTrument[:SELect]?
Example :INST:SEL SA
Remote Command Notes FSE, FSP, FSU
State Saved Saved in instrument state.
Mode :INSTrument:NSELect
<integer>
:INSTrument[:SELect]
<parameter>
Spectrum Analyzer 1 SA
GSM 3 GSM
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

Agilent Technologies EXA N9010A Specifications

General

Brand	Agilent Technologies
Model	EXA N9010A
Category	Measuring Instruments
Language	English