146
Compatible SCPI Commands
Supported SCPI Commands
[SENSe<1|2>:]POWer:ACHannel:PRESet ACPower | CPOWer | MCACpower | OBANdwidth |
OBWidth | CN | CN0
Adjusts the frequency span, the measurement bandwidths including the required detector for the number
of channels, the channel bandwidths, and the channel spacings selected in the active power
measurement. If required, switches on the adjacent-channel power measurement prior to the adjustment.
[SENSe<1|2>:]POWer:ACHannel:PRESet:RLEVel
Adjusts the reference level to the measured channel power. If required, switches on the adjacent channel
power measurement.
This command is accepted, but takes no action and reports no error.
[SENSe<1|2>:]POWer:BANDwidth|BWIDth 10 to 99.9PCT
Specifies the power percentage with respect to the total power.
Preset 1
State Saved Saved in instrument state.
Min 1
Max 2
Remote Command [:SENSe]:POWer:ACHannel:PRESet
ACPower|CPOWer|MCACpower|OBANdwidth|OBWidth|CN|CN0
Example SENS:POW:ACH:PRES ACP
Remote Command Notes FSE, FSP, FSU
State Saved No
Range ACPower | CPOWer | MCACpower | OBANdwidth | OBWidth | CN | CN0
Remote Command [:SENSe]:POWer:ACHannel:PRESet:RLEVel
Example SENS:POW:ACH:PRES:RLEV
Remote Command Notes FSP, FSU
Remote Command [:SENSe]:POWer:BANDwidth|BWIDth <real>
[:SENSe]:POWer:BANDwidth|BWIDth?
Example POW:BAND 99.0
POW:BAND?
Remote Command Notes FSP, FSU
Preset 99PCT
State Saved Saved in instrument state.
To Next Page
Loading...
Need help?
General
