Agilent Technologies EXA N9010A - Mmemory:select[:Item]:Scdata on | off; Mmemory:select[:Item]:Transducer:all on | off; Mmemory:select[:Item]:All

128
Compatible SCPI Commands
Supported SCPI Commands
MMEMory:SELect[:ITEM]:SCData ON | OFF
This command is accepted, but takes no action and reports no error.
MMEMory:SELect[:ITEM]:TRANsducer:ALL ON | OFF
This command is accepted, but takes no action and reports no error.
MMEMory:SELect[:ITEM]:ALL
This command is accepted, but takes no action and reports no error.
Example MMEM:SEL:LIN:ALL OFF
MMEM:SEL:LIN:ALL?
Remote Command Notes FSE, FSP, FSU
Preset ON
State Saved Saved in instrument state.
Remote Command :MMEMory:SELect[:ITEM]:SCData ON|OFF|1|0
:MMEMory:SELect[:ITEM]:SCData?
Example MMEM:SEL:SCD OFF
MMEM:SEL:SCD?
Remote Command Notes FSE, FSP, FSU
Preset OFF
State Saved Saved in instrument state.
Remote Command :MMEMory:SELect[:ITEM]:TRANsducer:ALL ON|OFF|1|0
:MMEMory:SELect[:ITEM]:TRANsducer:ALL?
Example MMEM:SEL:TRAN:ALL OFF
MMEM:SEL:TRAN:ALL?
Remote Command Notes FSE, FSP, FSU
Preset ON
State Saved Saved in instrument state.
Remote Command :MMEMory:SELect[:ITEM]:ALL
Example MMEM:SEL:ALL
Remote Command Notes FSE, FSP, FSU
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html