Agilent Technologies EXA N9010A - Calculate:statistics:scale:auto ONCE; Calculate:statistics:scale:X:rlevel -130 Dbm to 30 Dbm; Calculate:statistics:scale:X:range 10 Db to 200 Db

99
Compatible SCPI Commands
Supported SCPI Commands
CALCulate:STATistics:SCALe:AUTO ONCE
This command is accepted, but takes no action and reports no error.
CALCulate:STATistics:SCALe:X:RLEVel –130dBm to 30dBm
Specifies the reference level for the X-axis of the measurement display. The setting is identical to the
reference level setting using the command DISPlay:WINDow:TRACe:Y: RLEVel.
This command is accepted, but takes no action and reports no error.
CALCulate:STATistics:SCALe:X:RANGe 10dB to 200dB
Specifies the level range for the X-axis of the measurement display. The setting is identical to the level
range setting defined with the command DISPlay:WINDow:TRACe:Y:SCALe.
This command is accepted, but takes no action and reports no error.
Remote Command :CALCulate[1]:STATistics:SCALe:AUTO ONCE
Example CALC:STAT:SCAL:AUTO ONCE
Remote Command Notes FSP, FSU
Remote Command :CALCulate[1]:STATistics:SCALe:X:RLEVel <ampl>
:CALCulate[1]:STATistics:SCALe:X:RLEVel?
Example CALC:STAT:SCAL:X:RLEV –60dBm
CALC:STAT:SCAL:X:RLEV?
Remote Command Notes FSP, FSU
Preset –20dBm
State Saved Saved in instrument state.
Min –130
Max 30
Remote Command :CALCulate[1]:STATistics:SCALe:X:RANGe <rel_ampl>
:CALCulate[1]:STATistics:SCALe:X:RANGe?
Example CALC:STAT:SCAL:X:RANG 20dB
CALC:STAT:SCAL:X:RANG?
Remote Command Notes FSP, FSU
Preset 100dB
State Saved Saved in instrument state.
Min 10
Max 200
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html