35
Front Panel Operations
Send Commands
Send Commands
After you finish setting up the N9062A/W9062A application, you can send FSE/FSP/FSU commands to
X-Series analyzers.
It is recommended to use Agilent 82357B USB/GPIB interface and free instrument to PC connection
tool Agilent IO Libraries Suite when you connect the instrument to a PC. For more details, visit:
http://www.agilent.com/find/82357B
http://www.agilent.com/find/iolib
NOTE The commands can be sent via a GPIB, LAN, USB, or Telnet connection that your
X-Series analyzer can support.
To Next Page
Loading...
