147
Compatible SCPI Commands
Supported SCPI Commands
[SENSe<1|2>:]POWer:HSPeed ON | OFF
Switches on or off the high-speed channel or adjacent channel power measurement.
[SENSe<1|2>:]POWer:NCORrection ON | OFF
Switches on or off the instrument inherent noise correction for channel power measurement.
[SENSe<1|2>:]POWer:TRACe 1 to 3
Assigns the channel or adjacent channel power measurement to the indicated trace in the selected
measurement window.
This command is accepted, but takes no action and reports no error.
Min 10
Max 99.99
Remote Command [:SENSe]:POWer:HSPeed ON|OFF|1|0
[:SENSe]:POWer:HSPeed?
Example POW:HSP ON
POW:HSP?
Remote Command Notes FSP, FSU
Preset OFF
State Saved Saved in instrument state.
Remote Command [:SENSe]:POWer:NCORrection ON|OFF|1|0
[:SENSe]:POWer:NCORrection?
Example POW:NCOR ON
POW:NCOR?
Remote Command Notes FSP, FSU
Preset OFF
State Saved Saved in instrument state.
Remote Command [:SENSe]:POWer:TRACe <int>
[:SENSe]:POWer:TRACe?
Example SENS:POW:TRAC 1
SENS:POW:TRAC?
Remote Command Notes FSP, FSU
State Saved Saved in instrument state.
To Next Page
Loading...
Need help?
General
