24
Getting Started
Installing the N9062A & W9062A SCPI Language Compatibility Application
number.
The license is downloaded from the license website onto a USB storage device so that it can be loaded
into the instrument.
A license key is usually for one instrument model/serial number combination. The license key can only
be installed on that instrument.
License Installation Procedure over USB
1. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the Certificate.
2. After redeeming your Option Upgrade Entitlement Certificate you will receive an e-mail with an
attached License File.
3. Locate a USB storage device and save the .lic file to the root directory of the USB storage device.
4. Connect the USB storage device to one of the signal analyzer USB ports. Windows detects the new
hardware and may display the configuration menu. This menu may be configured according to your
preferences.
5. The signal analyzer automatically consumes the license file. (This may take a few minutes) When the
license is consumed the Agilent License Manager displays a âSuccessful License Installationâ
message.
6. Alternatively the license file can be manually installed over USB or LAN by placing the license file
in the following folder on the signal analyzer.
C:\Program Files\Agilent\licensing
Verify the Installation
1. Press System > Show > System to display the list of installed applications.
2. Verify that the new application appears in the list.
If you require further assistance, please contact the Agilent support team.
Online assistance: http://www.agilent.com/find/assist
If you do not have access to the Internet, contact your local Agilent Technologies Sales and Service
Office, or if in the United States, call 1-800-829-4444.
Required Information: Front Panel Key Path:
Model #: (Ex. N9020A)
Instrument ī
Serial Number:ī
__________________
System > Show > System
To Next Page
Loading...
Need help?
General
