Agilent Technologies EXA N9010A - Calculate<1|2>:Deltamarker<1

63
Compatible SCPI Commands
Supported SCPI Commands
CALCulate<1|2>:DELTamarker<1...4>:MAXimum:RIGHt
Places the delta marker at the next smaller maximum to the right of the current value (that is, in order of
increasing X values). If required, the specified delta marker is first activated.
CALCulate<1|2>:DELTamarker<1...4>:MINimum[:PEAK]
Places the delta marker at the current minimum on the trace. If required, the specified delta marker is
first activated.
CALCulate<1|2>:DELTamarker<1...4>:MINimum:LEFT
Places the delta marker at the next higher minimum to the left of the current value (that is, in order of
decreasing X values). If required, the specified delta marker is first activated.
CALCulate<1|2>:DELTamarker<1...4>:MINimum:NEXT
Places the delta marker at the next higher minimum of the trace. If required, the specified delta marker is
first activated.
CALCulate<1|2>:DELTamarker<1...4>:MINimum:RIGHt
Places the delta marker at the next higher minimum to the right of the current value (that is, in order of
increasing X values). If required, the specified delta marker is first activated.
Remote Command Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:DELTamarker[1]|2|3|4:MAXimum:RIGHt
Example CALC:DELT:MAX:RIGH
Remote Command Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:DELTamarker[1]|2|3|4:MINimum[:PEAK]
Example CALC:DELT:MIN
Remote Command Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:DELTamarker[1]|2|3|4:MINimum:LEFT
Example CALC:DELT:MIN:LEFT
Remote Command Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:DELTamarker[1]|2|3|4:MINimum:NEXT
Example CALC:DELT:MIN:NEXT
Remote Command Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:DELTamarker[1]|2|3|4:MINimum:RIGHt
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html