16
Getting Started
What Does the Agilent N9062A & W9062A SCPI Language Compatibility Application Do?
What Does the Agilent N9062A & W9062A SCPI
Language Compatibility Application Do?
The Agilent N9062A & W9062A SCPI Language Compatibility application is designed to allow
X-Series signal analyzers (including CXA, EXA, MXA and PXA) to be controlled using the SCPI
programming commands (as known as SCPI commands, or SCPI) from the following Rohde & Schwarz
(R&S) instruments:
• R&S FSE
• R&S FSP
• R&S FSU
The X-Series analyzer with the N9062A/W9062A application installed is able to emulate the
FSE/FSP/FSU measurement functions as closely as possible in many automated systems with minimal
or no modification to the currently used measurement software.
The N9062A/W9062A application supports over 300 SCPI commands from the FSE/FSP/FSU
instruments and 16 of IEEE488.2 standard SCPI commands.
NOTE The N9062A/W9062A application supports commands from the Spectrum
Analyzer (default) mode. Commands from other options or modes are not
supported.
The N9062A/W9062A does not support the same front panel operations, user
interface and measurement screen display as the FSE/FSP/FSU instruments.
The N9062A/W9062A does not support the Split Screen feature.
The N9062A/W9062A partly supports Channel Power measurements, OBW
measurements, ACP measurements and IQ traces.
To Next Page
Loading...
