Agilent Technologies EXA N9010A - Display:annotation:frequency on | off; Display:format Single | Split; Display:logo on | off

106
Compatible SCPI Commands
Supported SCPI Commands
DISPlay:FORMat SINGle | SPLit
Switches the measurement result display between FULL SCREEN and SPLIT SCREEN.
This command is accepted, but takes no action and reports no error.
DISPlay:ANNotation:FREQuency ON | OFF
Switches X-axis annotation on or off.
This command is accepted, but takes no action and reports no error.
DISPlay:LOGO ON | OFF
Switches the on-screen company logo on or off.
This command is accepted, but takes no action and reports no error.
Remote Command :DISPlay:FORMat SINGle|SPLit
:DISPlay:FORMat?
Example DISP:FORM SING
Remote Command Notes FSE, FSP, FSU
Preset SINGle
State Saved Saved in instrument state.
Range SINGle|SPLit
Remote Command :DISPlay:ANNotation:FREQuency ON|OFF|1|0
:DISPlay:ANNotation:FREQuency?
Example DISP:ANN:FREQ OFF
DISP:ANN:FREQ?
Remote Command Notes FSE, FSP, FSU
Preset ON
State Saved Saved in instrument state.
Remote Command :DISPlay:LOGO ON|OFF|1|0
:DISPlay:LOGO?
Example DISP:LOGO OFF
DISP:LOGO?
Remote Command Notes FSE, FSP, FSU
Preset ON
State Saved Saved in instrument state.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html