Agilent Technologies EXA N9010A - Mmemory:clear:all; Mmemory:select[:Item]:Hwsettings on | off; Mmemory:select[:Item]:Trace[:Active] on | off; Mmemory:select[:Item]:Lines:all on | off

127
Compatible SCPI Commands
Supported SCPI Commands
MMEMory:CLEar:ALL
Clears all analyzer settings in the current directory.
This command is accepted, but takes no action and reports no error.
MMEMory:SELect[:ITEM]:HWSettings ON | OFF
This command is accepted, but takes no action and reports no error.
MMEMory:SELect[:ITEM]:TRACe[:ACTive] ON | OFF
This command is accepted, but takes no action and reports no error.
MMEMory:SELect[:ITEM]:LINes:ALL ON | OFF
This command is accepted, but takes no action and reports no error.
Remote Command :MMEMory:CLEar:ALL
Example :MMEM:CLE:ALL
Remote Command Notes FSE, FSP, FSU
Remote Command :MMEMory:SELect[:ITEM]:HWSettings ON|OFF|1|0
:MMEMory:SELect[:ITEM]:HWSettings?
Example MMEM:SEL:HWS OFF
MMEM:SEL:HWS?
Remote Command Notes FSE, FSP, FSU
Preset On
State Saved Saved in instrument state.
Remote Command :MMEMory:SELect[:ITEM]:TRACe[:ACTive] ON|OFF|1|0
:MMEMory:SELect[:ITEM]:TRACe[:ACTive]?
Example MMEM:SEL:TRAC OFF
MMEM:SEL:TRAC?
Remote Command Notes FSE, FSP, FSU
Preset OFF
State Saved Saved in instrument state.
Remote Command :MMEMory:SELect[:ITEM]:LINes:ALL ON|OFF|1|0
:MMEMory:SELect[:ITEM]:LINes:ALL?
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html