Agilent Technologies EXA N9010A - Trigger<1|2>[:Sequence]:Holdoff; Trigger<1|2>[:Sequence]:Level:video 0 to 100 PCT

163
Compatible SCPI Commands
Supported SCPI Commands
This mode supports the level range:–200 to 100 dBm.
TRIGger<1|2>[:SEQuence]:LEVel:VIDeo 0 to 100PCT
Sets the video trigger level.
TRIGger<1|2>[:SEQuence]:HOLDoff
Specifies the trigger delay period.
Remote Command :TRIGger[1][:SEQuence]:LEVel:RFPower <real>
:TRIGger[1][:SEQuence]:LEVel:RFPower?
Example TRIG:LEV:RFP –20DBM
Remote Command Notes FSP
Preset –20dBm
State Saved Saved in instrument state.
Min –200dBm
Max 100dBm
Remote Command TRIGger[1][:SEQuence]:LEVel:VIDeo <real>
TRIGger[1][:SEQuence]:LEVel:VIDeo?
Example TRIG:LEV:VID 40
TRIG:LEV:VID?
Remote Command Notes FSE, FSP, FSU
Preset 50
State Saved Saved in instrument state.
Min 0
Max 100
Remote Command :TRIGger[1][:SEQuence]:HOLDoff <time>
:TRIGger[1][:SEQuence]:HOLDoff?
Example TRIG:HOLD 100ms
Remote Command Notes FSE, FSP, FSU
Preset 0s
State Saved Saved in instrument state.
Min 0s
Max 0.5s
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html