23
Getting Started
Installing the N9062A & W9062A SCPI Language Compatibility Application
Installing the N9062A & W9062A SCPI Language
Compatibility Application
N9062A & W9062A SCPI Language Compatibility for the R&S FSE/FSP/FSU analyzers is a licensed
application on the X-Series analyzers. The application must be installed and licensed on the X-Series
analyzer, PXA, MXA, EXA and CXA, for it to work correctly.
License for N9062A/W9062A
License N9062A-2FP is required to provide SCPI language compatibility on Agilent X-Series analyzers
PXA, MXA and EXA.
License W9062A-2FP is required to provide SCPI language compatibility on Agilent X-Series analyzer
CXA.
Installation
The license is installed on the X-Series analyzer in one of the following ways:
• If you purchased a new X-Series analyzer with the N9062A/W9062A application then the product is
installed and licensed and ready to use.
• If you have an X-Series analyzer and have subsequently purchased the N9062A/W9062A application
then you can download the N9062A/W9062A application from the Agilent website. The N9062A &
W9062A SCPI Language Compatibility application is installed as part of a software upgrade. See the
link below for Signal Analyzers software upgrade site. After upgrading your software you should
then use your entitlement certificate to license the product (see Licensing below).
The latest revision of the software may be downloaded from:
http://www.agilent.com/find/pxa_software
http://www.agilent.com/find/mxa_software
http://www.agilent.com/find/exa_software
http://www.agilent.com/find/cxa_software
NOTE No calibration is required after the N9062A/W9062A application is installed.
Licensing
When you order a licensed product, you receive an entitlement certificate. Instructions are provided on
your entitlement certificate to direct you to the Web site to redeem your certificate for a license key. You
need to provide your instrument product number and serial number, and the entitlement certificate
To Next Page
Loading...
