Agilent Technologies EXA N9010A User Manual

22
Getting Started
Hardware and Firmware Requirements for N9062A/W9062A
For maximum compatibility, you should select an X-Series analyzer that equals or exceeds the frequency
range of the FSE/FSP/FSU analyzer you are replacing.
Table 1-4 Compatible Agilent CXA Series Signal Analyzers
Analyzer Model
Number
Upper Frequency Limit Firmware
N9000A-503 3 GHz Rev A.10.01 or later
N9000A-507 7.5 GHz Rev A.10.01 or later
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

Agilent Technologies EXA N9010A Specifications

General

Brand	Agilent Technologies
Model	EXA N9010A
Category	Measuring Instruments
Language	English