Agilent Technologies EXA N9010A - Sense:correction Subsystem; [Sense<1|2>:]Bandwidth|Bwidth:video:auto on | off; [Sense<1|2>:]Bandwidth|Bwidth:video:ratio 0.01 to 1000; [Sense<1|2>:]Correction:egain:input[:Magnitude] -200

133
Compatible SCPI Commands
Supported SCPI Commands
[SENSe<1|2>:]BANDwidth|BWIDth:VIDeo:AUTO ON | OFF
Automatically couples the instrument's video bandwidth to its resolution bandwidth or cancels the
coupling.
[SENSe<1|2>:]BANDwidth|BWIDth:VIDeo:RATio 0.01 to 1000
Specifies the video bandwidth (Hz) / resolution bandwidth (Hz) ratio.
SENSe:CORRection Subsystem
The SENSe:CORRection subsystem controls calibration andnormalization.
[SENSe<1|2>:]CORRection:EGAin:INPut[:MAGNitude] –200...200dB
Informs the analyzer of an external gain.
Min 1 Hz
Max 50 MHz
Backwards Compatibility SCPI :SENSe1:BANDwidth|BWIDth[:RESolution]:VIDeo
Remote Command [:SENSe]:BANDwidth|BWIDth:VIDeo:AUTO
ON|OFF|1|0[:SENSe]:BANDwidth|BWIDth:VIDeo:AUTO?
Example BAND:VID:AUTO OFF
Remote Command Notes FSE, FSP, FSU
Preset ON
State Saved Saved in instrument state.
Backwards Compatibility SCPI :SENSe1:BANDwidth|BWIDth[:RESolution]:VIDeo:AUTO
Remote Command [:SENSe]:BANDwidth|BWIDth:VIDeo:RATio <real>
[:SENSe]:BANDwidth|BWIDth:VIDeo:RATio?
Example BAND:VID:RAT 2
BAND:VID:RAT?
Remote Command Notes FSE, FSP, FSU
Preset 3
State Saved Saved in instrument state.
Min 0.00001
Max 3000000
Backwards Compatibility SCPI :SENSe1:BANDwidth|BWIDth[:RESolution]:VIDeo:RATio
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html