87
Compatible SCPI Commands
Supported SCPI Commands
CALCulate<1|2>:MARKer<1...4>:X <0âĻMAX> (frequency | sweep time)
The command places the selected marker at the indicated frequency, time, or level (for APD or CCDF
measurements).
If marker 2, 3 or 4 is selected and used as delta marker, it is switched to marker mode.
The query returns the current value of this setting.
CALCulate<1|2>:MARKer<1...4>:X:SLIMits[:STATe] ON | OFF
The command switches the search range limits on or off.
For this command, the numeric suffix <1...4> is ignored.
If time domain power measurement is active, this command limits the evaluation range on the trace.
The query returns the current state of this setting.
CALCulate<1|2>:MARKer<1...4>:X:SLIMits:LEFT <0âĻMAX> (frequency | sweep time)
The command sets the left limit of the search range for markers and delta markers.
Remote Command Notes FSE, FSP, FSU
Preset 1
Min 1
Max 3
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:X <real>
:CALCulate[1]:MARKer[1]|2|3|4:X?
Example CALC:MARK:X 1000000000
CALC:MARK:X?
Remote Command Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:X:SLIMits[:STATe]
ON|OFF|1|0
:CALCulate[1]:MARKer[1]|2|3|4:X:SLIMits[:STATe]?
Example CALC:MARK:X:SLIM:STAT ON
Remote Command Notes FSE, FSP, FSU
Preset OFF
State Saved Saved in instrument state.
To Next Page
Loading...
Need help?
General
