73
Compatible SCPI Commands
Supported SCPI Commands
CALCulate<1|2>:LIMit<1âĻ6>:ACPower:ACHannel[:RELative]:STATe
Invokes the limit check for the relative limit value of the adjacent channel when
ACP measurement is performed.
The result can be queried with CALCulate:LIMit:ACPower:ACHannel:RESult?. A complete
measurement must be performed between switching on the limit check and the result query, since
otherwise no valid results are available.
The numeric suffix is irrelevant for this command.
CALCulate<1|2>:LIMit<1âĻ6>:ACPower:ACHannel:ABSolute
Specifies the absolute limit value for the lower/upper adjacent channel during ACP measurement in the
selected measurement window.
The numeric suffix in LIMIt is irrelevant for this command.
Example CALC:LIM:ACP:ACH 30DB, 30DB
CALC:LIM:ACP:ACH:REL 30DB, 30DB
CALC:LIM:ACP:ACH?
CALC:LIM:ACP:ACH:REL?
Notes FSU, FSP, FSE
Preset 0dB, 0dB
State Saved Saved in instrument state.
Remote Command :CALCulate[1]:LIMit[1]|2|3|4|5|6:ACPower:ACHannel[:RELa
tive]:STATe ON|OFF|1|0
:CALCulate[1]:LIMit[1]|2|3|4|5|6:ACPower:ACHannel[:RELa
tive]:STATe?
Example CALC:LIM:ACP:ACH:STAT ON
CALC:LIM:ACP:ACH:REL:STAT ON
CALC:LIM:ACP:ACH:STAT?
CALC:LIM:ACP:ACH:REL:STAT?
Notes FSU, FSP, FSE
Preset OFF
State Saved Saved in instrument state.
Remote Command :CALCulate[1]:LIMit[1]|2|3|4|5|6:ACPower:ACHannel:ABSol
ute <real>,<real>
:CALCulate[1]:LIMit[1]|2|3|4|5|6:ACPower:ACHannel:ABSol
ute?
To Next Page
Loading...
Need help?
General
