148
Compatible SCPI Commands
Supported SCPI Commands
SENSe:ROSCillator Subsystem
The SENSe:ROSCillator subsystem controls the reference oscillator. The numeric suffix in SENSe is
irrelevant for the commands in this subsystem.
[SENSe<1|2>:]ROSCillator:SOURce INTernal | EXTernal
Switches between an external or internal reference oscillator for frequency processing of external
generators 1 and 2.
SENSe:SWEep Subsystem
The SENSe:SWEep subsystem controls the sweep parameters.
[SENSe<1|2>:]SWEep:TIME 2.5ms to 16000s (frequency domain) | 1us to 16000s (time domain)
Specifies sweep time.
Min 1
Max 3
Remote Command [:SENSe]:ROSCillator:SOURce INTernal|EXTernal
[:SENSe]:ROSCillator:SOURce?
Example ROSC:SOUR EXT
Remote Command Notes FSE, FSP, FSU
Preset INT
State Saved Yes.
Range INTernal|EXTernal
Remote Command [:SENSe]:SWEep:TIME <time>
[:SENSe]:SWEep:TIME?
Example SWE:TIME 500ms
Remote Command Notes FSE, FSP, FSU
Preset 1ms
State Saved Saved in instrument state.
Min 1 ms
Max 4000 s
To Next Page
Loading...
