95
Compatible SCPI Commands
Supported SCPI Commands
CALCulate<1|2>:MARKer<1…4>:FUNCtion:SUMMary:RMS[:STATe] ON | OFF
Switches on or off the measurement of the effective (RMS) power in the selected measurement window.
If necessary the function is switched on previously.
CALCulate<1|2>:MARKer<1…4>:FUNCtion:SUMMary:RMS:RESult?
Queries the result of the measurement of the RMS power value in the selected measurement window.
CALCulate<1|2>:MARKer<1...4>:FUNCtion:NOISe[:STATe]
The command switches noise measurement on or off for all markers.
The noise power density is measured at the marker positions. The result may be queried using
CALCulate:MARKer:FUNCtion:NOISe:RESult?.
The query returns the current state of this setting.
Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:SUMMary:RMS[:STA
Te] ON|OFF|1|0
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:SUMMary:RMS[:STA
Te]?
Example CALC:MARK:FUNC:SUMM:RMS ON
CALC:MARK:FUNC:SUMM:RMS?
Notes FSE, FSP, FSU
Preset OFF
State Saved Saved in instrument state.
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:SUMMary:RMS:RESu
lt?
Example CALC:MARK:FUNC:SUMM:RMS:RES?
Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:NOISe[:STATe]
ON|OFF|1|0
:CALCulate[1]:DELTamarker[1]|2|3|4:FUNCtion:NOISe[:STAT
e]?
Example CALC:MARK:FUNC:NOIS ON
Remote Command Notes FSE, FSP, FSU
Preset OFF
State Saved Saved in instrument state.
To Next Page
Loading...
