94
Compatible SCPI Commands
Supported SCPI Commands
CALCulate<1|2>:MARKer<1…4>:FUNCtion:FPEaks:COUNt?
Reads out the number of maxima found during the search. If no search has been performed, 0 is returned.
CALCulate<1|2>:MARKer<1…4>:FUNCtion:REFerence
Sets the reference level in the selected measurement window to the power measured by the indicated
marker.
CALCulate<1|2>:MARKer<1…4>:FUNCtion:FPEaks:X?
Reads out the list of X values of the maxima found. The number of available values can be queried with
CALC:MARK:FUNC:FPEaks:COUNt?.
CALCulate<1|2>:MARKer<1…4>:FUNCtion:FPEaks:Y?
Reads out the list of X values of the maxima foand. The number of available values can be queried with
CALC:MARK:FUNC:FPEaks:COUNt?.
CALCulate<1|2>:MARKer<1…4>:FUNCtion:FPEaks:SORT X|Y
Sets the sort mode for the search for maxima:
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks:COUNt?
Example CALC:MARK:FUNC:FPE:COUN?
Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:REFerence
Example CALC:MARK:FUNC:REF
Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks:X?
Example CALC:MARK:FUNC:FPE:X?
Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks:Y?
Example CALC:MARK:FUNC:FPE:Y?
Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks:SORT X|Y
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks:SORT?
Example CALC:MARK:FUNC:FPE:SORT X
CALC:MARK:FUNC:FPE:SORT?
To Next Page
Loading...
