Agilent Technologies EXA N9010A - R&S Fse; R&S Fsp; R&S Fsu

31
Front Panel Operations
Mode Setup
Alternatively, you can select the desired compatibility mode using the following SCPI command.
R&S FSE
Selects emulation of FSE.
R&S FSP
Selects emulation of FSP.
R&S FSU
Selects emulation of FSU.
Key Path: Mode Setup
Remote Command [:SENSe]:RLC:TYPE FSE|FSP|FSU
[:SENSe]:RLC:TYPE?
Example RLC:TYPE FSU
RLC:TYPE?
Preset FSP
State Saved
Saved in instrument state.
Range FSE|FSP|FSU
Notes If you don’t install the N9062A-2FP or W9062A-2FP license,
SCPI
Language Compatibility
mode is not available.
Initial S/W Revision: A.06.00 or later
Key Path:
Mode Setup, Compatibility Model
Example: RLC:TYPE FSE
Initial S/W Revision: A.06.00 or later
Key Path:
Mode Setup, Compatibility Model
Example: RLC:TYPE FSP
Initial S/W Revision: A.06.00 or later
Key Path:
Mode Setup, Compatibility Model
Example: RLC:TYPE FSU
Initial S/W Revision: A.06.00 or later
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html