91
Compatible SCPI Commands
Supported SCPI Commands
This command is an event, and therefore has no *RST value and no query.
CALCulate<1|2>:MARKer<1...4>:MAXimum:AUTO ON | OFF
For marker 1, the command switches on or off operation of automatic maximum peak search at the end
of each sweep.
The marker search limit settings are taken into account.
For this command, the numeric suffix <1 to 4> is ignored.
The query returns the current state of this setting.
CALCulate<1|2>:MARKer<1...4>:MINimum:AUTO ON | OFF
For marker 1, the command switches on or off operation of automatic minimum peak search at the end of
each sweep.
The marker search limit settings are taken into account.
For this command, the numeric suffix <1 to 4> is ignored.
The query returns the current state of this setting.
Remote Command CALCulate[1]:MARKer[1]|2|3|4:MINimum:RIGHt
Example CALC:MARK:MIN:RIGH
Remote Command Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:MAXimum:AUTO ON|OFF|1|0
:CALCulate[1]: MARKer[1]|2|3|4:MAXimum:AUTO?
Example CALC:MARK:MAX:AUTO ON
CALC:MARK:MAX:AUTO?
Remote Command Notes FSU
Preset OFF
State Saved Saved in instrument state.
Remote Command :CALCulate[1]:MARKer[1]|2|3|4:MINimum:AUTO ON|OFF|1|0
:CALCulate[1]: MARKer[1]|2|3|4:MINimum:AUTO?
Example CALC:MARK:MIN:AUTO ON
CALC:MARK:MIN:AUTO?
Remote Command Notes FSU
Preset OFF
State Saved Saved in instrument state.
To Next Page
Loading...
Need help?
General
