Agilent Technologies EXA N9010A User Manual

25
Getting Started
Running Software that Requires SCPI Commands
Running Software that Requires SCPI Commands
You only have access to a subset of SCPI commands from FSE/FSP/FSU instruments. The SCPI
commands supported by X-Series analyzers are listed in Table 3-1 on page 38.
If you are not familiar with the SCPI language, Chapter 4 , “A Brief Introduction to the SCPI Language,”
on page 165 contains some useful information.
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html

Agilent Technologies EXA N9010A Specifications

General

Brand	Agilent Technologies
Model	EXA N9010A
Category	Measuring Instruments
Language	English