Agilent Technologies EXA N9010A - R&S Fse; R&S Fsp; R&S Fsu; Mode IDN Response

58
Compatible SCPI Commands
Supported SCPI Commands
R&S FSE
Selects emulation of the R&S FSE.
R&S FSP
Selects emulation of the R&S FSP.
R&S FSU
Selects emulation of the R&S FSU.
Mode IDN Response
The command allows you to set or query the Mode IDN Response type.
This setting affects the response string of “*IDN?”, and the whole SCPI tree, according to the current
selection.
The query returns the current state of this setting.
Range FSE | FSP| FSU
Initial S/W Revision A.06.00 or later
Key Path
Mode Setup, Compatibility Mode
Example RLC:TYPE FSE
Initial S/W Revision A.06.00 or later
Key Path
Mode Setup, Compatibility Mode
Example RLC:TYPE FSP
Initial S/W Revision A.06.00 or later
Key Path
Mode Setup, Compatibility Mode
Example RLC:TYPE FSU
Initial S/W Revision A.06.00 or later
Key Path
Mode Setup
Remote Command [:SENSe]:RLC:IDN:TYPE SYSTem|COMPatibility|USER
[:SENSe]:RLC:IDN:TYPE?
Example SENS:RLC:IDN:TYPE SYSTem
RLC:IDN:TYPE?
State Saved
Saved in instrument state.
Range SYSTem | COMPatibility | USER
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html