139
Compatible SCPI Commands
Supported SCPI Commands
[SENSe<1|2>:]FREQuency:CENTer:STEP:LINK:FACTor 1 to 100 PCT
Couples the center frequencyâs step width to a factor of the span (span >0) or to the resolution bandwidth
(span = 0).
[SENSe<1|2>:]FREQuency:SPAN 0 to fmax
Specifies the frequency span.
[SENSe<1|2>:]FREQuency:SPAN:FULL
Sets the frequency span to maximum.
Example FREQ:CENT:STEP:LINK RBW
FREQ:CENT:STEP:LINK?
Remote Command Notes FSE, FSP, FSU
Preset SPAN
State Saved Saved in instrument state.
Backwards Compatibility SCPI :SENSe1:FREQuency:CENTer:STEP:LINK
Remote Command [:SENSe]:FREQuency:CENTer:STEP:LINK:FACTor <int>
[:SENSe]:FREQuency:CENTer:STEP:LINK:FACTor?
Example FREQ:CENT:STEP:LINK:FACTor 20PCT
Remote Command Notes FSE, FSP, FSU
State Saved Saved in instrument state.
Min 1
Max 100
Backwards Compatibility SCPI :SENSe1:FREQuency:CENTer:STEP:LINK:FACTor
Remote Command [:SENSe]:FREQuency:SPAN <freq>
[:SENSe]:FREQuency:SPAN?
Example FREQ:SPAN 10MHz
Remote Command Notes FSE, FSP, FSU
Preset 3 GHz
State Saved Saved in instrument state.
Max 26.5 GHz
Backwards Compatibility SCPI :SENSe1:FREQuency:SPAN
Remote Command [:SENSe]:FREQuency:SPAN:FULL
To Next Page
Loading...
Need help?
General
