61
Compatible SCPI Commands
Supported SCPI Commands
CALCulate<1|2>:DELTamarker<1...4>:AOFF
Switches off all active delta markers.
CALCulate<1|2>:DELTamarker<1...4>:TRACe <1âĻ3>
Assigns the specified delta marker to the specified trace.
CALCulate<1|2>:DELTamarker<1...4>:X<0âĻMAX>(frequency | sweep time)
The command positions the specified delta marker at the indicated frequency (span > 0) or time (span =
0).
The query returns the current value of this parameter.
CALCulate<1|2>:DELTamarker<1...4>:X:RELative?
Queries the frequency or time value of the specified delta marker, relative to marker 1, or to the reference
position (for CALCulate:DELTamarker:FUNCtion:FIXed:STATe ON). If required, the corresponding
Remote Command Notes FSE, FSP, FSU
Preset RELative
State Saved
Saved in instrument state.
Range ABSolute | RELative
Remote Command :CALCulate[1]:DELTamarker[1]|2|3|4:AOFF
Example CALC:DELT:AOFF
Remote Command Notes FSE, FSP, FSU
Remote Command :CALCulate[1]:DELTamarker[1]|2|3|4:TRACe 1|2|3
Example CALC:DELT:TRAC 1
Remote Command Notes FSE, FSP, FSU
Preset 1
State Saved Saved in instrument state.
Min 1
Max 3
Remote Command :CALCulate[1]:DELTamarker[1]|2|3|4:X <real>
:CALCulate[1]:DELTamarker[1]|2|3|4:X?
Example CALC:DELT:X 10.7MHz
CALC:DELT:X?
Remote Command Notes FSE, FSP, FSU
To Next Page
Loading...
Need help?
General
