Agilent Technologies EXA N9010A - Status:questionable:ptransition; Status:questionable:ntransition; Status:questionable:frequency[:Event]; Status:questionable:frequency:condition

155
Compatible SCPI Commands
Supported SCPI Commands
STATus:QUEStionable:PTRansition
This mode supports the maximum value of 32767, not 65535 as in FSx.
STATus:QUEStionable:NTRansition
Specifies the edge detectors of all bits in the STATus:OPERation register from 1 to 0 for the transitions
of the CONDition bit.
This mode supports the maximum value of 32767, not 65535 as FSx.
STATus:QUEStionable:FREQuency[:EVENt]
Queries the contents of the EVENt section in the STATus:QUEStionable: FREQuency register.
STATus:QUEStionable:FREQuency:CONDition
Queries the contents of the CONDition section in the
STATus:QUEStionable:FREQuency register. The contents of the CONDition section are not deleted
Remote Command :STATus:QUEStionable:PTRansition <integer>.
:STATus:QUEStionable:PTRansition?
Example STAT:QUES:PNTR 16
Remote Command Notes FSE, FSP, FSU
Preset 0
Min 0
Max 32767
Remote Command :STATus:QUEStionable:NTRansition <integer>.
:STATus:QUEStionable:NTRansition?
Example STAT:QUES:NTR 16
Remote Command Notes FSE, FSP, FSU
Preset 0
Min 0
Max 32767
Remote Command :STATus:QUEStionable:FREQuency[:EVENt]?
Example STAT:QUES:FREQ?
Remote Command Notes FSE, FSP, FSU
Preset 0
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html