Agilent Technologies 33521A User Manual

67
Chapter 2 Front-Panel Menu Operation
To Configure the Remote Interface
4
2
LAN Configuration
There are several parameters that you might need to set to establish
network communication using the LAN interface. Primarily, you will
need to establish an IP address. You might need to contact your network
administrator for help in establishing communication with the LAN
interface.
1 Select the “I/O” menu.
Press and then press the I/O Config softkey.

Agilent Technologies 33521A Specifications

General

Brand	Agilent Technologies
Model	33521A
Category	Laboratory Equipment
Language	English