Agilent Technologies 34410A - Datasheet Manual

Agilent 34410A and 34411A Multimeters
Data Sheet
Agilent 34410A 6
1
/
2
-Digit
High-Performance DMM
• 10,000 readings/s @ 5
1
/
2
-digits
direct to PC
• 1,000 readings/s @ 6
1
/
2
-digits
direct to PC
• 30 PPM 1-year Basic DC accuracy
• LAN, USB & GPIB standard
• DCV, ACV, DCI, ACI, 2-wire and
4-wire Resistance, Frequency,
Period, Continuity, and Diode Test
• Capacitance & Temperature
measurements
• Expanded measurement ranges
• Data logger with 50 k reading
non-volatile memory
Agilent 34411A 6
1
/
2
-Digit
Enhanced-Performance DMM
All the features of the 34410A, plus:
• 50,000 readings/s @ 4
1
/
2
-digits
direct to PC
• 1 million volatile reading memory
• Analog level triggering
• Programmable Pre/Post triggering
The Best Just Got Better
The Agilent 34410A and 34411A
6
1
/
2
-Digit DMMs represent the lat-
est generation of multimeters from
Agilent Technologies. Building on the
phenomenal success of the industry-
standard Agilent 34401A, these new
meters offer improved accuracy,
expanded measurement capability,
dramatically improved measurement
speed and throughput, and modern
computer interfaces including LAN
and USB. The dual display offers
both dual measurement capabilities
and ease of use when setting up and
configuring the DMM. Improvements
have been made in every facet of the
34401A to make the best even bet-
ter, whether you use it on the bench
or in a system.
Dramatic Speed Improvements
Whether it’s raw reading speed or
fast system throughput, the 34410A
sets a new benchmark in perfor-
mance. Using a new A/D technology,
the 34410A achieves an impressive
10,000 readings a second at 5
1
/
2
-dig-
its, and can stream readings to
your computer at this same speed!
Triggering is fast and precise, with
both trigger latency and trigger jit-
ter less than 1 µs, while bus query
response is less than 500 µs. ACV
measurements are faster as well
thanks to a digital measurement
technique that additionally improves
accuracy at high and low frequen-
cies. For even greater reading speeds,
select the 34411A, which achieves
50,000 readings a second at 4
1
/
2
-dig-
its.
Enhanced Measurement Performance
The 34410A and 34411A offer
Temperature and Capacitance
capabilities, in addition to those mea-
surements you have come to expect,
such as DCV, ACV, DCI, ACI, 2-wire
and 4-wire Resistance, Frequency,
Period, Continuity and Diode Test.
You also get Offset Compensated
Ohms, allowing you to accurately
measure resistance in the presence of
voltages. Measurement ranges have
been expanded as well; for example,
DC and AC Current Ranges now go
down to 100 µA, resulting in 100
pA resolution. Real-time math and
statistics are included, and a peak-
detect capability allows you to cap-
ture peaks as short as 20 µs.
See Agilent's Truevolt Series of DMMs
• Display DMM results in ways you never have before
• Measure with unquestioned Truevolt confidence
• Move to the next generation 34401A DMM with 100% assurance
www.agilent.com/find/dmm