Agilent Technologies 34970A - Agilent Quality and Reliability; Relay Maintenance System

Switch Control Commands
(see page 259 in the User’s Guide)
ROUTe
:CLOSe (
@<ch_list>)
:CLOSe:EXCLusive (
@<ch_list>)
:CLOSe? (
@<ch_list>)
ROUTe
:OPEN (@<ch_list>)
:OPEN? (
@<ch_list>)
ROUTe:DONE?
SYSTem:CPON {100|200|300|ALL}
Scan Triggering Commands
(see page 228 in the User’s Guide)
TRIGger
:SOURce {BUS|
IMMediate|EXTernal|ALARm1|ALARm2|ALARm3|ALARm4|TIMer}
:SOURce?
TRIGger
:TIMer {<
seconds>|MIN|MAX}
:TIMer?
TRIGger
:COUNt {<
count>|MIN|MAX|INFinity}
:COUNt?
*TRG
INITiate
READ?
State Storage Commands
(see page 261 in the User’s Guide)
*SAV {0|1|2|3|4|5}
*RCL {0|1|2|3|4|5}
MEMory:STATe
:NAME {1|2|3|4|5} [,<
name>]
:NAME? {1|2|3|4|5}
MEMory:STATe:DELete {0|1|2|3|4|5}
MEMory:STATe
:RECall:AUTO {OFF|
ON}
:RECall:AUTO?
MEMory:STATe:VALid? {0|1|2|3|4|5}
MEMory:NSTates?
This command applies to all channels in the instrument (Global setting).
Default parameters are shown in bo ld.
12