Agilent Technologies 34970A - Versatility for Data Acquisition Applications; Data Logger and Switch System Roles

Temperature Configuration Commands
(see page 219 in the User’s Guide)
CONFigure
:TEMPerature {
TCouple|RTD|FRTD|THERmistor|DEF}
,{<
type>|DEF}[,1[,{<resolution>|MIN|MAX|DEF}]] ,(@<scan_list>)
CONFigure? [(@<ch_list>)]
UNIT
:TEMPerature {
C|F|K}[,(@<ch_list>)]
:TEMPerature? [(
@<ch_list>)]
[SENSe:]TEMPerature:TRANsducer
:TYPE {
TCouple|RTD|FRTD|THERmistor|DEF}[,(@<ch_list>)]
:TYPE? [(
@<ch_list>)]
[SENSe:]TEMPerature:TRANsducer
:TCouple:TYPE {B|E|J|
K|N|R|S|T}[,(@<ch_list>)]
:TCouple:TYPE? [(
@<ch_list>)]
:TCouple:CHECk {
OFF|ON}[,(@<ch_list>)]
:TCouple:CHECk? [(
@<ch_list>)]
[SENSe:]TEMPerature:TRANsducer
:TCouple:RJUNction:TYPE {
INTernal|EXTernal|FIXed}[,(@<ch_list>)]
:TCouple:RJUNction:TYPE? [(
@<ch_list>)]
:TCouple:RJUNction {<
temperature>|MIN|MAX}[,(@<ch_list>)]
:TCouple:RJUNction? [(
@<ch_list>)]
[SENSe:]TEMPerature:RJUNction? [(
@<ch_list>)]
[SENSe:]TEMPerature:TRANsducer
:RTD:TYPE {85|91}[,(@<ch_list>)]
:RTD:TYPE? [(@<ch_list>)]
:RTD:RESistance[:REFerence] <
reference>[,(@<ch_list>)]
:RTD:RESistance[:REFerence]? [(
@<ch_list>)]
[SENSe:]TEMPerature:TRANsducer
:FRTD:TYPE {
85|91}[,(@<ch_list>)]
:FRTD:TYPE? [(
@<ch_list>)]
:FRTD:RESistance[:REFerence] <
reference>[,(@<ch_list>)]
:FRTD:RESistance[:REFerence]? [(
@<ch_list>)]
[SENSe:]TEMPerature:TRANsducer
:THERmistor:TYPE {2252|
5000|10000}[,(@<ch_list>)]
:THERmistor:TYPE? [(
@<ch_list>)]
[SENSe:]
TEMPerature:NPLC {0.02|0.2|1|2|10|20|100|200|MIN|MAX}[,(@<ch_list>)]
TEMPerature:NPLC? [{(
@<ch_list>)|MIN|MAX}]
This command redefines the scan list when executed.
Default parameters are shown in bold.
5