Agilent Technologies 34970A - Input Signal Capabilities and Features; Versatile Alarms and Scanning; Input Monitoring and Memory

Resistance Configuration Commands
(see page 224 in the User’s Guide)
CONFigure
:RESistance [{<
range>|AUTO|MIN|MAX|DEF}
[,<resolution>|MIN|MAX|DEF}],] (@<scan_list>)
CONFigure? [(
@<ch_list>)]
[SENSe:]
RESistance:RANGe {<range>|MIN|MAX}[,(@<ch_list>)]
RESistance:RANGe? [{(
@<ch_list>|MIN|MAX}]
RESistance:RANGe:AUTO {OFF|
ON}[,(@<ch_list>)]
RESistance:RANGe:AUTO? [(
@<ch_list>)]
[SENSe:]
RESistance:RESolution {<resolution>|MIN|MAX}[,(@<ch_list>)]
RESistance:RESolution? [{(
@<ch_list>)|MIN|MAX}]
RESistance:APERture {<
time>|MIN|MAX}[,(@<ch_list>)]
RESistance:APERture? [{(
@<ch_list>)|MIN|MAX}]
RESistance:NPLC {0.02|0.2|1|2|10|20|100|200|MIN|MAX}[,(@<ch_list>)]
RESistance:NPLC? [{(
@<ch_list>)|MIN|MAX}]
[SENSe:]
RESistance:OCOMpensated {OFF|ON}[,(@<ch_list>)]
RESistance:OCOMpensated? [(
@<ch_ list>)]
CONFigure
:FRESistance [{<
range>|AUTO|MIN|MAX|DEF}
[,<
resolution>|MIN|MAX|DEF}],] (@<scan_list>)
CONFigure? [(
@<ch_list>)]
[SENSe:]
FRESistance:RANGe {<
range>|MIN|MAX}[,(@<ch_list>)]
FRESistance:RANGe? [{(
@<ch_list>)|MIN|MAX}]
FRESistance:RANGe:AUTO {OFF|
ON}[,(@<ch_list>)]
FRESistance:RANGe:AUTO? [(
@<ch_list>)]
[SENSe:]
FRESistance:RESolution {<
resolution>|MIN|MAX}[,(@<ch_list>)]
FRESistance:RESolution? [{(
@<ch_list>)|MIN|MAX}]
FRESistance:APERture {<
time>|MIN|MAX}[,(@<ch_list>)]
FRESistance:APERture? [{(@<ch_list>)|MIN|MAX}]
FRESistance:NPLC {0.02|0.2|
1|2|10|20|100|200|MIN|MAX}[,(@<ch_list>)]
FRESistance:NPLC? [{(
@<ch_list>)|MIN|MAX}]
[SENSe:]
FRESistance:OCOMpensated {OF F |ON}[,(@<ch_list>)]
FRESistance:OCOMpensated? [(@<ch_ list>)]
This command redefines the scan list when executed.
Default parameters are shown in bold.
7