Agilent Technologies 34970A - Customizing with Plug-in Modules; Module Design Advantages

Digital Input Commands
(see page 255 in the User’s Guide)
Ch 01
DIO (LSB)
Ch 02
DIO (MSB)
Ch 03
Totalizer
Ch 04
DAC
Ch 05
DAC
CONFigure:DIGital:BYTE (@<scan_list>)
CONFigure? [(@<ch_list>)]
[SENSe:]DIGital:DATA:{
BYTE|WORD}? [(@<ch_list>)]
Totalizer Commands
(see page 256 in the User’s Guide)
Ch 01
DIO (LSB)
Ch 02
DIO (MSB)
Ch 03
Totalizer
Ch 04
DAC
Ch 05
DAC
CONFigure:TOTalize {READ|RRESet} ,(@<scan_list>)
CONFigure? [(
@<ch_list>)]
[SENSe:]
TOTalize:TYPE {
READ|RRESet}[,(@<ch_list>)]
TOTalize:TYPE? [(@<ch_list >)]
[SENSe:]
TOTalize:SLOPe {NEGative|
POSitive}[,(@<ch_list>)]
TOTalize:SLOPe? [(@<ch_list>)]
[SENSe:]TOTalize:CLEar:IMMediate [(
@<ch_ list>)]
[SENSe:]TOTalize:DATA? [(
@<ch_ list>)]
Digital Output Commands
(see page 258 in the User’s Guide)
Ch 01
DIO (LSB)
Ch 02
DIO (MSB)
Ch 03
Totalizer
Ch 04
DAC
Ch 05
DAC
SOURce
:DIGital:DATA[:{
BYTE|WORD}] <data> ,(@<ch_list>)
:DIGital:DATA[:{BYTE|WORD}]? (@<ch _list>)
SOURce:DIGital:STATe? (
@<ch_list>)
DAC Output Commands
(see page 258 in the User’s Guide)
Ch 01
DIO (LSB)
Ch 02
DIO (MSB)
Ch 03
Totalizer
Ch 04
DAC
Ch 05
DAC
SOURce
:VOLTage <
voltage> ,(@<ch_list>)
:VOLTage? (@<ch_list>)
This command redefines the scan list when executed.
Default parameters are shown in bold.
11