Agilent Technologies 34970A - Automated Test System Capabilities; Powerful Measurement Performance; Flexible Functionality

Current Configuration Commands
(see page 224 in the User’s Guide)
Valid only on channels 21 and 22 on the 34901A multiplexer module.
CONFigure
:CURRent:DC [{<
range>|AUTO|MIN|MAX|DEF}
[,<
resolution>|MIN|MAX|DEF}],] (@<scan_list>)
CONFigure? [(
@<ch_list>)]
[SENSe:]
CURRent:DC:RANGe {<
range>|MIN|MAX}[,(@<ch_list>)]
CURRent:DC:RANGe? [{(
@<ch_list>)|MIN|MAX}]
CURRent:DC:RANGe:AUTO {OFF|
ON}[,(@<ch_list>)]
CURRent:DC:RANGe:AUTO? [(
@<ch_list>)]
[SENSe:]
CURRent:DC:RESolution {<
resolution>|MIN|MAX}[,(@<ch_list>)]
CURRent:DC:RESolution? [{(
@<ch_list>)|MIN|MAX}]
[SENSe:]
CURRent:DC:APERture {<
time>|MIN|MAX}[,(@<ch_list>)]
CURRent:DC:APERture? [{(
@<ch_list>)|MIN|MAX}]
[SENSe:]
CURRent:DC:NPLC {0.02|0.2|
1|2|10|20|100|200|MIN|MAX}[,(@<ch_list>)]
CURRent:DC:NPLC? [{(
@<ch_list>)|MIN|MAX}]
CONFigure
:CURRent:AC [{<
range>|AUTO|MIN|MAX|DEF}
[,<
resolution>|MIN|MAX|DEF}],] (@<scan_list>)
CONFigure? [(
@<ch_list>)]
[SENSe:]
CURRent:AC:RANGe {<
range>|MIN|MAX}[,(@<ch_list>)]
CURRent:AC:RANGe? [{(
@<ch_list>)|MIN|MAX}]
CURRent:AC:RANGe:AUTO {OFF|
ON}[,(@<ch_list>)]
CURRent:AC:RANGe:AUTO? [(
@<ch_list>)]
[SENSe:]
CURRent:AC:BANDwidth {3|
20|200|MIN|MAX}[,(@<ch_list>)]
CURRent:AC:BANDwidth? [{(
@<ch_list>)|MIN|MAX}]
This command redefines the scan list when executed.
Default parameters are shown in bold.
8